Projector Plc
|
|
SANYO PLC-XP50 Replacement Projector Lamp 610-306-5977 / LMP67
$395.00 Lamp Hours:2000 / Watts:300 / Lamp Type:NSH... |
|
|
Sanyo 610-300-0862 - Replacement Projection Lamp - For Projector Models PLC-UF15 - PLC-XF45 - PLC-XF42
$299.00 Brand: Sanyo - Part No.: 610-300-0862 - Warranty: 30 Days - Fits Projector Models: PLC-UF15 - PLC-XF45 - PLC-XF42 -... |
|
|
PLC Lighting TR-PJ-BK Framing Projector
PLC Lighting TR-PJ-BK Features: -Framing projector. -Black finish.... |
|
|
Sanyo PLC WXU300 - LCD projector - 2500 ANSI lumens - WXGA (1280 x 800) - widescreen 720p - short-throw zoom lens
$1,295.00 2500 Lumens, WXGA(1280 x 800), 500:1 Contrast Ratio... |
|
|
Replacement Projector Lamp for EIKI LC-SB22, EIKI LC-XB23,EIKI LC-XB27N, SANYO PLC-SU70, SANYO PLC-XE40,SANYO PLC-XL40, SANYO PLC-XL40L, SANYO PLC-XL40S,SANYO PLC-XU2530C, SANYO PLC-XU73, SANYO PLC-XU76,SANYO PLC-XU83, SANYO PLC-XU86. 610-323-0726
$315.00 Replacement Projector Lamp for EIKI LC-SB22, EIKI LC-XB23,EIKI LC-XB27N, SANYO PLC-SU70, SANYO PLC-XE40,SANYO PLC-XL40, SANYO PLC-XL40L, SANYO PLC-XL40S,SANYO PLC-XU2530C, SANYO PLC-XU73, SANYO PLC-XU76,SANYO PLC-XU83, SANYO PLC-XU86. 610-323-0726... |
|
|
PLC-XL50A 3LCD XGA 2000 LUMEN SANYO PROJECTOR Sanyo
$1,352.33 PLC-XL50A LCD Projector IR Remote Control LCD Projector 700:1 80" 7.80" Height x 14.70" Width x 14.70" Depth 110 V AC 220 V AC PLC-XL50A www.sanyo.com The unique short throw distance of the PLC-XL50A allows projection in virtually any environment, particularly areas that traditional projectors can not be used, such as floors and desktops. In order for SANYO to shorten the projection distance of th... |
|
|
SANYO PLC-XP50 Replacement Projector Lamp 610-306-5977 / LMP67
$395.00 Lamp Hours:2000 / Watts:300 / Lamp Type:NSH... |
How can U tell by looking at the multimedia projector lamp AA bulb breaks?
This is a Sanyo PLC-5605B
Take the bulb of the projector. Wait until a light. There must be something to "arms" protruding into the air. Usually there are three or four of them. At the end of the "arms" must have a good piece of wire that connects the three or four arms. If there is no filament, its focus is useless, and you should buy a new one. If the filament is there, then you might have a problem with the projector. Good luck.