Wall Plate Bulk
|
|
Pass & Seymour SS724 Stainless Steel Wall Plate Receptacle Single Gang
$2.99 "PASS & SEYMOUR" STAINLESS STEEL WALL PLATE *Single opening (2-5/32") power receptacle wall plate *Single gang *302 stainless steel construction *Smooth, clean no-line design *Easy open wrapper *Bagged... |
|
|
WALLPLAT FLT PL BULK ALM [Misc.]
$5.99 "ACE" HOME THEATER WALL PLATE Designed to fit behind most wall mount flat panel TVs Mounting requires minimum clearance of 1-1/4" from wall to mounting bracket or TV Hole diameter approximately 3/4" x 2-3/4" Accommodates HDMI, DVI and VGA cables Carded Almond... |
|
|
PETRA Appliance Power Cord
... |
|
|
Vanco Single Gang Bulk Wire Wall Plate White [120614x]
$1.75 The Vanco Reversible signal cable wall plate provides a clean, attractive looking alternative to signal cable wall entrance/exit points for home theater projects, including flat panel TV installation. The reversible cable cover can either extend from the wall or extend into the wall for tight spaces such as behind the flat panel TV.... |
|
|
2 PACK! New EZ Install Bulk Cable Pass Through Wall Plate NO Work Box Required! EZ Tabs!
$10.99 You will receive 2 EZ fit cable pass throughs. The EZ Install tabs will have your job finished in no time! Mounts horizontally or vertically.... |
|
|
LEVITON 004-80455-T 2 GANG DECORATOR & DUPLEX RECEPTACLE WALLPLATE
$1.59 "LEVITON" 2 GANG COMBINATION WALLPLATE Decorator and duplex receptacle wallplate Standard size Thermoset phenolic Matching mounting screws provided Almond Bulk... |
|
|
Pass & Seymour SS724 Stainless Steel Wall Plate Receptacle Single Gang
$2.99 "PASS & SEYMOUR" STAINLESS STEEL WALL PLATE *Single opening (2-5/32") power receptacle wall plate *Single gang *302 stainless steel construction *Smooth, clean no-line design *Easy open wrapper *Bagged... |
Cheekbones (zygomatic) fracture is one of the most common facial fractures over the years, I have seen many cheekbone (malar) fractures and are commonly the result of personal attacks (being beaten on the face) and sports injuries. The cheek bone sits in a very important part of the face and as a result, it is easily beaten. It acts as a shield for the eye, which is located above and behind it.
Most of the cheekbone is what we see, but excels as such, because it is linked by four "pillars" of the deepest parts of the face. When broken cheek bone, which moves because these accessories fracture allowing the collapse inward and downward. As it falls back, and goes directly into the underlying maxillary sinus is only one outdoor space. Because part of the bone of the cheek makes a portion of the floor of the eyes, there is a fractured cheek bone loss of the prominence of the cheek and one eye making it appear that it has fallen lower.
The repair of these fractures involves putting it back into place and get one or more of these sections with plates and screws. The fracture fixation can be done through an incision inside the mouth, through the lower eyelid, or both, depending on the degree of displacement of the bones. Plate and screws composed of titanium metal and is very small in size works well enough for the repair of these lesions in the facial bones. I did a lot with this method metal and is the current standard of care.
In the past ten years, I have also repaired the broken cheek bone with a resorbable plate and screw system composed of polymer LactoSorb. These resorbable plates and screws have been used in over 100,000 cases craniofacial since 1996 and has a history proven safety and efficacy. In the cheek bone fracture well selected, plates and screws can provide good results LactoSorb stable. Plates of 2.0 mm in size are placed vertically along the back of the jaw support (if possible) and obliquely from the zygomatic bone to the pyriform aperture. (which is always possible). Plates are smaller than 2.0 mm of adequate strength. The cheek fractures that best work with this method of fixation resorbale are what I call simple fractures, an intraoral approach with only one or two plates is all that is needed to properly restore their pre-injury anatomical position.
Repositioning jaw in place, almost always leave a space between the bone and the front wall of the maxillary sinus. If the bone gap is too high, you might want to consider a bone graft for long-term stability.
My experience with repair of the cheek with the fixation of fractures of LactoSorb always been satisfactory. I have not experienced any infection, the collapse of the cheekbone, or adverse reactions to materials such as bone heals and the material absorbs up to one year after surgical repair.
